TB9400 Specifications Manual Base Station Specifications 9
© Tait Limited July 2017
1 Base Station Specifications
The performance figures given in these specifications are applicable only
to equipment operating as an integral part of a TB9400 base station. These
performance figures are minimum figures, unless otherwise indicated, for
equipment operating at standard room temperature (+22°C to +28°C
[+71.6°F to +82.4°F]) and standard test voltages as follows:
■ AC power management unit (PMU) - 120VAC and 230VAC
■ 12V DC PMU - 12VDC
■ 24V DC PMU - 24VDC
■ 48V DC PMU - 48VDC.
The TB9400 is available in the following configurations:
■ 50W single or dual base station with PMU
■ 100W single base station with PMU
■ receive-only base station - up to four receivers (receive-only reciters)
with PMU.
Notice The software release notes list known issues or limitations of
the base station that may vary from the specifications published in this
document. Please refer to the current software release notes for any vari-
ations to the specifications in this document.
To Next Page
Loading...
Need help?
General
