TB9400 Specifications Manual Preface 7
© Tait Limited July 2017
5 December 2014 Changes for version 1.45 release.
Additions
■ K4 band receive-only base station specifications
■ P25 Phase 2 specifications
Updates
■ P25 Phase 2 emission designators
■ compliance standards
6 April 2015 Changes for version 2.00 release.
Additions
■ K4 band 50W base station specifications
■ peak-to-average power level specifications
Updates
■ base station MTBF
■ compliance standards
7 July 2015 Changes for version 2.05 release.
Additions
■ information on receive-only base stations and receiver modules
■ 1PPS jitter specification
Updates
■ external frequency reference stability specification
■ compliance standards
8 November 2015 Changes for version 2.10 release.
Additions
■ information on analog base stations
Updates
■ compliance standards
9 April 2016 Changes for version 2.15 release.
Additions
■ Clarification of repeater vs. base station for K and L bands in Brazil
10 June 2016
Changes for version 2.20 release.
Additions
■ table added to section 1.5 Analog RF specifying that the TB9400 only
supports Narrow Bandwidth
■ inclusion of B band alongside G and F
11 November 2016
Changes for version 2.25 release.
Additions
■ General updates.
■ Information added in regards to the QoS requirements (delay, jitter,
loss, duplication).
■ Fix Anatel approvals
Issue Publication Date Description
To Next Page
Loading...
Need help?
General
