TM8100 Mobile Radio Service Manual General Information 85
May 2004 © Tait Electronics Limited
Test Equipment The following test equipment is required for servicing the radio:
■ test PC (with programming and calibration applications loaded)
■ RF communications test set (audio bandwidth of at least 10 kHz)
■ oscilloscope
■ digital current meter (capable of measuring up to 3 A)
■ multimeter
■ DC power supply (capable of 13.8 V and 10 A)
■ spare TM8115 control head
■ spare TM8110 control head
■ TMAA21-00 service kit
Separate instruments may be used in place of the RF communications
test set. These are an RF signal generator, audio signal generator, audio
analyzer, RF power meter, and modulation meter. Details of the service
kit are given below.
Service Kit The TMAA21-00 service kit contains all the items needed for
connecting the radio to the test equipment. The setting up of the
equipment is described in Subsection 4.5 (on page 93). The service kit
also includes a product support CD and a folder with the necessary
service documentation, including this manual. The CD contains the
programming application, calibration application, and soft-copies of the
service and related documentation. The contents of the service kit are
listed in Table 4.3. Note that the TMAA20-04 cable listed is required
only if the test PC is to be connected directly to the radio for
programming purposes.
Table 4.3 Contents of TMAA21-00 service kit
Product code Item
TMAA21-01 Cable (DB14 socket to RJ45 plug plus in-line connector)
TMAA20-01 Product support CD
TMAA20-02 Adaptor (RJ45 socket to DB9 socket)
TMAA20-03 Cable (power connector to banana plugs plus in-line connector)
TMAA20-04 Cable (RJ12 socket to RJ45 plug)
T2000-A19 Cable (DB9 socket to RJ12 plug)
TOPA-SV-024 Test unit
MM8100-01-00-812 Service and accessories manuals
To Next Page
Loading...
Need help?
General
