Tait TM9300 User Manual

Operating in conventional mode 49
5 Operating in
conventional mode
This section explains how to operate your radio on a
conventional network (digital and analog).
This section covers:
■ Selecting a zone
■ Selecting a channel
■ Selecting a scan or vot-
ing group
■ Understanding talk-
groups
■ Making a call
■ Making an individual
call
■ Making a preset call
■ Making a call using the
address book
■ Making a local call
■ Making a DTMF patch
call
■ Making an emergency
call
■ Setting your status (on
analog channels)
■ Sending and receiving
status messages
■ Sending and receiving
text messages
■ Checking the queue
■ Call alert
■ Radio check
■ Radio monitor
■ Radio inhibit and unin-
hibit
■ Resending calls auto-
matically
■ Transmitting at low
power
■ Ending active calls
■ Using monitor and
squelch override
(on analog channels)
■ Bypassing the repeater
(on analog channels)
■ Receiving a call
■ Using the radio in dif-
ferent repeater areas
■ Scanning a group of
channels

Tait TM9300 Specifications

General

Modulation	FM, 4FSK (DMR)
IP Rating	IP54
GPS	Optional
Bluetooth	Optional
Frequency Range	450-520 MHz
Channel Spacing	12.5 / 25 kHz
Operating Modes	Analog FM
Dimensions	160 x 60 x 40 mm (without antenna)
Weight	1.6 kg (3.53 lbs)
Operating Temperature	-30°C to +60°C (-22°F to +140°F)
Power Output	5 W, 25 W, 50 W
RF Output Power	5 W, 25 W, 50 W