Tait TM9300 User Manual

Operating in trunked mode 89
6 Operating in trunked
mode
This section explains how your radio operates on a
DMR (digital), MPT (analog) or dual-mode trunked
network.
These features are controlled by software
licenses (SFE) and may not be available with
your radio.
Your radio must have trunking functionality
programmed before it can operate in DMR or
MPT trunked mode.
This section covers:
■ Checking that your network is available
■ Changing your network
■ Making a call using the address book
■ Making a preset call
■ About trunked zones and workgroups
■ About emergency operation
■ Dialing a PABX number
■ Dialing a PSTN number
■ Receiving a call
■ Re-establishing a call
■ Checking the queue
■ About status messages
■ About trunked text messages
■ Placing the radio in do-not-disturb mode
■ Switching to conventional channels or conven-
tional groups

Tait TM9300 Specifications

General

Modulation	FM, 4FSK (DMR)
IP Rating	IP54
GPS	Optional
Bluetooth	Optional
Frequency Range	450-520 MHz
Channel Spacing	12.5 / 25 kHz
Operating Modes	Analog FM
Dimensions	160 x 60 x 40 mm (without antenna)
Weight	1.6 kg (3.53 lbs)
Operating Temperature	-30°C to +60°C (-22°F to +140°F)
Power Output	5 W, 25 W, 50 W
RF Output Power	5 W, 25 W, 50 W