TN-2776h-AN www.taitradio.com Page 2 of 16
Preparation
Observe ESD Precautions
This equipment contains devices that are susceptible to damage from electrostatic discharge
(ESD). Handle every device carefully and in strict accordance with the procedures defined in the
databook provided by the manufacturer.
For information on anti-static precautions and the dangers of electrostatic discharge, refer to
standards such as ANSI/ESD S20.20-1999 and BS EN100015-4 1994 or go to the Electrostatic
Discharge Association website www.esda.org.
Tait recommends that you buy an anti-static bench kit from a reputable manufacturer. The
bench must have:
• A dissipative rubber bench mat
• A conductive wrist strap
• A connection to ground
Figure 1.1 Typical anti-static bench setup
Also follow strict anti-static measures when carrying, storing, or shipping a front cover.
To Next Page
Loading...
Need help?
General
