EasyManua.ls Logo

Tait TP9100 Series P25 - Charger Troubleshooting and Compatibility

Tait TP9100 Series P25
168 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Troubleshooting 147
Troubleshooting the charger
The table below describes what to do if the orange
(right) LED on the battery charger is either flashing
or glowing.
Charger
orange LED
Meaning
Possible reason(s)
and solution
Flashing Fault The battery is not compatible with
the charger. Use only Tait chargers
and batteries. See "Checking com-
patibility" on page 148.
The charger firmware is not com-
patible with the battery type.
See "Checking the firmware version
of your charger" on page 148.
There is insufficient voltage to the
charger. Check you are using the
correct power adaptor.
The battery may be deeply dis-
charged (less than 3 V). Disconnect
the battery from the radio and
charge the battery.
The battery may be faulty. Consult
your radio provider for advice.
If all orange LEDs are flashing on
the multicharger, the charger itself
may be faulty (e.g. the fan may be
jammed or faulty). Consult your
radio provider for advice.
Glowing Charging
suspended
The battery is either too hot or too cold.
Charging will start or resume once the
temperature is within normal limits. No
action is required by you.

Table of Contents

Related product manuals