EasyManua.ls Logo

Tait TP9100 Series P25 - For Your Safety - Battery Warning; Attaching Labels to the Radio or Battery

Tait TP9100 Series P25
168 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26 Before using your radio
For your safety battery
warning
Warning This radio may use a Lithium-ion battery.
If the battery is damaged or handled in an unsafe
manner, it can cause personal injury and/or damage
to property. Read the important safety information
included with your battery.
Attaching labels to the radio or
battery
Warning Do not cover the battery vent hole. If the
vent on the battery is obstructed, the battery may
explode, causing personal injury and/or damage to
property.
Notice Tait recommends that you do not affix
additional labels to the surfaces between the radio
chassis and the battery. The fit between these
surfaces is intentionally firm and any added thickness
will damage the points of attachment between radio
and battery.
If a customer requires a customized label, use only a
thin gummed paper label with a maximum thickness of
1/32 inch (0.1mm). Attach the customized label in the
spare label recess in the chassis (if available), or over
an existing label. The customized label may be
applied to the bottom 25% of the radio chassis label
and/or to the top 25% of the battery label.

Table of Contents

Related product manuals