Need help?Do you have a question about the Taiwan Scale T2200P series and is the answer not in the manual?
Setting the zero point for weighing and counting operations.
Procedure to subtract container weight for accurate product measurement.
Steps to determine the weight of a sample with a container.
Using the scale for counting identical items by sample.
Setting low and high limits for check-weighing.
Managing accumulation memory via clearing or printing.
Configuring the display unit for weight measurements.
Setting the date and time formats for the indicator.
Adjusting clock display and backlight behavior.
Setting up RS-232 communication, baud rate, and print format.
Entering programming and calibration menus using a password.
Specifications, connector details, and pin assignments for RS-232.
Data formats for standard weighing and counting operations.
Detailed protocols for continuous data transmission.
Configuration options for auto zero maintain and range.
Adjusting decimal places and division increments.
Setting capacity, load cell trimming, and internal counts.
Parameters for natural and animal scale operational modes.
Setting the scale for subtraction mode with specific print format.
Using subtraction mode with an alternative print format.
General| Category | Monitor |
|---|---|
| Panel Type | TN |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
To Next Page