Fuel and Lubricant Chart
Use different fuels, lubricants and greases according to the temperature, referring to the chart
below.
�
Change the lubricant earlier than as shown in the table if it is extremely dirty or its performance
has deteriorated severely.
�
Whenever possible, use the same brand of lubricant as before. If changing with a different
brand, replace the entire quantity – do not mix different brands.
Service Data
* : For water, use tap water (soft). Do not use well or river water.
When the ambient temperature drops below 0°C, add coolant (antifreeze). Follow the
coolant manufacturer’s instructions to determine the mixture ratio.
Gear oil
API-GL-4
SAE 85W 90
With additives for oil-bath
brakes
Slew bearing
Working
equipment
Levers
Lithium
based
gr
ease
EP-2
NLGI No. 2
Every 50 hrs.
Daily or every
10 hrs.
When required
As
required
Hub
Transmission
Differential
Undercarriage
Every 1500 hrs.
1.0 (1.1)
1.3 (1.38)
8.5 (2.25 US.gal.)
Every 250 hrs.
Part
Type
Type by temperature
-22 -4 14 32 50 68 86 104 °F
-30 -20 -10 0 10 20 30 40 °C
Replacement
interval
Capacity
Lit. (US. qt.)
Engine
oil pan
Diesel
engine oil
API-CF
After first 50 hrs.
Every 250 hrs.
Upper limit:
10.2 (10.8)
Lower limit:
5.7 (6)
System:
135
(35.7 US.gal.)
Tank:
68 (18 US.gal.)
Hydraulic
tank
Antiwear
hydraulic oil
Engine
cooling
system
Cooling
water (water
+ coolant) *
Every 1000 hrs.
12.0 (12.7)
ISO VG32
ISO VG46
ISO VG68
50% coolant mixture
30% coolant mix
ture
SAE 10W-30
SAE 15W-40
Every 2000
hrs.
To Next Page
Loading...
Need help?
General
