Doors and Covers
Starter Key
The starter key is used not only to start and
stop the engine, but also to lock and unlock
the following places:
�
Fuel filler cap
�
Cab door
�
Covers
Cab Door
WARNING
When mounting and dismounting the
cab, first open the door fully to the
locked position and check that it does
not move.
Open the door fully and press it against the
catch at the back of the door to lock it in
place. Always lock the door when mounting
and dismounting and when operating the
machine.
Lock and unlock
1. Insert the starter key and turn it.
Opening
1. Pull the knob (1) to open the door.
To open the door from inside, push the
lever (2) forward.
2. Open the door fully and press it against the
cab to lock it in place.
Closing
1. Either push release lever (3) to the front or
lower release lever.
2. Close the released door.
To Next Page
Loading...
