194
OPTIONS
� Do not pry with the chisel, and do not pry
while pounding.
�
Do not move the chisel while pounding.
�
Do not pound continuously for over 30
seconds on the same surface.
�
Do not pound with the cylinder fully
extended or contracted (at the stroke end).
Leave a margin of at least 5 cm.
�
Do not pound with the arm perpendicular
to the ground surface.
Hydraulic Breaker
For handling of the breaker, read the hydraulic
breaker’s manual, provided separately.
IMPORTANT: When mounting devices,
select devices suited for this machine.
For advice on selecting device, contact a
Takeuchi sales or service outlet.
Precautions on Operating
� Run the engine with 75% the maximum
speed.
�
Pound with the chisel perpendicular to the
surface you are pounding.
�
When pounding, press the chisel properly
against the object to be broken so as to
avoid pounding the air.
Pressing force
To Next Page
Loading...
