Every 250 Hours
Replacing the Engine Oil and Oil
Filter
Refer to page 124 “Replacing the Engine Oil
and Oil Filter”.
Inspecting and Adjusting the Fan
Belt
Refer to page 125 “Inspecting and Adjusting
the Fan Belt”.
Cleaning the Radiator Fins and Oil
Cooler Fins
WARNING
Wear required appropriate equipment
such as safety glasses and filter mask
when using compressed air, as metal
fragments or other objects can fly and
cause serious personal injury.
IMPORTANT: Be careful not to damage
the radiator fins and oil cooler fins when
cleaning them.
�
When using compressed air or pressurized
water, make sure the pressure is no higher
than 200 kPa (28 psi) and hold the nozzle
sufficiently away from the fins.
IMPORTANT: When using water, cover the
electrical system to prevent water from
getting in.
IMPORTANT: When operating the machine
in very dusty places, inspection and
maintenance should be performed every
day.
1. Open the left side cover and the engine
hood.
2. Blow compressed air on the radiator fins
and oil cooler fins to remove mud and dirt
stuck on them.
To Next Page
Loading...
Need help?
General
