Operating Precautions
Watch out for hazardous working
conditions
Never undercut a high bank. Be particularly
alert for the possibility of a cave-in.
Do not operate in places where there is a
danger of falling rocks.
Keep machine well back from the edge
of an excavation. Avoid undercutting the
machine.
Do not enter soft ground. Entry onto soft
ground can result in the machine tilting on
its own weight, tipping over, or falling in.
Do not approach unstable surfaces (cliffs,
road shoulders, deep trenches, etc.). The
ground may give way under the machine’s
weight or vibrations, causing the machine
to tip over.
• The ground is weak after rain or
explosions.
• The ground is also unstable on banks
and near dugout trenches.
Danger of flying objects
This machine is not equipped with protective
guards to protect the operator from flying
objects. Do not use the machine in places
where there are risks of the operator being hit
by flying objects.
To Next Page
Loading...
Need help?
General
