65
CONTROLS
Accessories
Radio (Cab Type)
Operating precautions
�
To ensure safe operation of the machine, always be sure to keep the volume of the radio
down to a level where you can easily hear sounds from outside the machine.
�
Do not keep the radio playing for long periods of time with the engine stopped. Doing so
will drain the battery of its charge and make it difficult or impossible to restart the engine.
�
Be careful not to allow water or other liquids to come into contact with the radio. Doing so
may result in it being rendered inoperable.
Names of the components
(1) POWER button
Use this button to turn on or off the radio.
(2) TONE control button
Use this button to select the tone. Press the
button to select low tone. The TONE LOW
display appears on the LCD. Press the button
again to select high tone.
(3) LCD
Displays the time/the receiving frequency and
the operation mode.
(4) CLOCK button
Use this button to switch between the clock
display and the receiving frequency display
on the LCD. If this button is not pressed for
six seconds while the frequency is displayed,
the LCD returns to the clock display.
(5) AST button
Use this button to automatically seek the
station information, store it into memory and
assign each preset button (1 to 6) a station.
(6) PRESET STATION buttons (1 to 6)
Use these buttons to store station information.
Each button can store information on one FM
station and one AM station. For how to use
these buttons, refer to “Presetting stations”.
To Next Page
Loading...
Need help?
General
