2-71
CONTROLS
Setting the flow rate
The flow rate in the auxiliary 1st, 2nd and 4th
can be set to the desired values.
For details, refer to “Auxiliary 1st flow rate
setting (1st AUX SET)” on page 2-29,
“Auxiliary 2nd flow rate setting (2nd AUX
SET)” on page 2-30 and “Auxiliary 4th flow
rate setting (4th AUX SET)” on page 2-30.
IMPORTANT: The set values are not the
guaranteed values. They should be used
as rough guides.
ACCESSORIES
To Next Page
Loading...
