Takeuchi TB225 User Manual

3-30
OPERATION
• When climbing in reverse, do not change
directions at the point where the slope
starts.
• Avoid traveling by setting one crawler on a
slope or projecting portion and the other
crawler on a flat surface (with the machine
at a tilt of 10° or more). Travel with both
crawlers set on flat surfaces.
• Do not change directions when the crawler
belts are slack as shown in the figure.
• The rubber crawler belts will come off if the
machine travels backward in this condition.
• The rubber crawler belts will come off if the
machine turns in this condition.
HANDLING RUBBER CRAWLERS

Takeuchi TB225 Specifications

General

Engine Make	Yanmar
Max Dig Depth	2, 580 mm
Bucket Capacity	0.03 - 0.11 m3
Max Reach	7, 010 mm
Max Digging Depth	3, 870 mm