Tandy 1000 Basic Reference Manual

Awwendix B
ASCII Character Codes
The previous table listed the ASCII codes (in hexadecimal) gen-
erated by each key. The following table lists the characters gen-
erated by those ASCII codes. (Note: All ASCII codes in this table
are expressed in
decimal form.)
You can display the characters listed by doing either
of the
following:
0 Using the BASIC statement PRINT CHR$(code), where code is
0 Pressing and, without releasing it, typing the ASCII code
For Codes
0-31, the table also lists the standard interpretations.
The interpretations are usually used
for control functions or
communications.
Note: The BASIC program editor has its own special
interpretation
of some codes and may not display the
character listed.
the ASCII code.
on the
numeric keypad.
383

Tandy 1000 Specifications

General

Processor	Intel 8088
Processor Speed	4.77 MHz
RAM	128 KB (expandable to 640 KB)
Operating System	MS-DOS 2.11
Manufacturer	Tandy Corporation
Release Year	1984
Storage	Single or double 5.25" floppy disk drive (360 KB), optional hard drive
Sound	Tandy 3-voice sound
Ports	Parallel, Serial
Graphics	CGA (Color Graphics Adapter)
Graphics Modes	320x200, 640x200