Targetmax TA920 - Chapter Three - Operation to Manager; Operation Step; Data Process

Targetmax® V.2.0 Attendance System Hardware Suite Guide
25
That means Password Attendance sign in successfully.
(For those with door lock feature, the door will open at the same time)
If in/out repeated interval time has been set, the machine will not record and
save any repeated in/out data in the interval time, in this case, will display
“Confirmed” only.
Chapter Three - Operation To Manager
Registered Managers can operate the machine and make program setting after
entering the 1
st
managing Menu.
3.1 Operation Steps
In the normal attending status, press “Menu”
(1) If the machine has not registered manager, screen will show:
Password Confirmed
Register No 50
Confirm Successfully！
Menu
1. Register Users
2. Delete Users
3. Data Download
Targetmax® V.2.0 Attendance System Hardware Suite Guide
26
* Enter menu interface under the operation state of manager.
(2) If the machine already registered manager, screen will show “Manager
verifying”:
a. Registered manager is required to sign in by fingerprint if he has been
registered by fingerprint.
b. Input the ID No. and Password if the registered manger is registered by
password.
* Enter menu interface under the operation state of manager.
(3) Display “Illegal Operation” with voice notice if un-recognition to the manager
(Different finger-mark or Wrong Password)
3.2 Data Process
Simple Introduction
In the normal attending status, press “Menu” (Manager Verification might
needed if the machine already registered manager)
Manager Verifying
15︰57
2005–07–30 Saturday
Menu
1. Register Users
2. Delete Users
3. Data Download