95
Service, maintenance and care
The maintenance of the machine is a prerequisite for impec-
cable operation and a long service life.
Service intervals
TASKI machines are high-quality machines that have been
checked for safety in the factory and by authorized inspectors.
Electrical and mechanical parts are subject to wear and aging
after a longer period of use.
Service center
Please always indicate the type and number of the machine
whenever you contact us for order placing or in case of mal-
functions.
The required data are provided on the nameplate of your ma-
chine. The address of your closest TASKI service partner is
provided on the last page of these instructions of use.
Blade replacement
Attention:
Use original TASKI parts only; otherwise,
any warranty and liability claims will ex-
pire.
Attention:
In order to rule out unintended machine
functions, before starting maintenance
works the following must always be carried
out
- the machine must be switched off,
- the key removed and
- the emergency stop confirmed.
Legend:
◊ = whenever cleaning is completed, ◊◊ = every week,
◊◊◊ = every month, ⊗ = service lamp
Activity
◊
◊◊
◊◊◊
⊗
Page
Loading batteries ● 88
Replenishing distilled water (wet-cell
batteries). Observe the service sheet of
the battery supplier!
●88
Draining and cleaning the recovery and
fresh water tank (Flextank)
●94
Check the intake and suction filter for
contaminations and clean them
●
Clean all yellow marked parts ●
Clean the brushes ● 94
Clean the suction nozzle, check the
blades for wear and change them, if
necessary
●93
Wipe the machine using a damp cloth ● 94
Clean the gasket of the tank cover,
check them for cracks and replace
them, if necessary
●
Check parking brake and emergency
stop button
●89
Maintenance and service program car-
ried out by Diversey service techni-
cians
●
• In order to maintain operational safety and
readiness for use, the machine must be ser-
viced whenever the maintenance indicator
lights up (factory setting is 650 working
hours) or at least once a year.
• Unscrew the four star screws (1) from the squeegee.
• Separate the squeegee body (2) from the squeegee core
(3).
• Remove the blades (4).
• Clean the squeegee body and both squeegee cores under
running water.
• Mount the "turned" or new blades onto the squeegee core.
• Reinsert the squeegee core into the squeegee body.
• Retighten the four star screws.
EN
To Next Page
Loading...
Need help?
General
