Taylor 342 Tim Hortons User Manual

25
Model 342 Tim Hortons Troubleshooting Guide
Section 8 Troubleshooting Guide
PROBLEM PROBABLE CAUSE REMEDY PAGE
REF.
1. No product is being
dispensed.
a. Power switch is in the
OFF position.
a. Place power switch in the
AUTO position.
20
b. Improper mixing of
product.
b. Carefully follow directions
for mixing product.
- - -
c. Inadequate mix in hopper. c. Fill hopper with mix. 20
d. Unit is out on reset. d. Place power switch in the
OFF position. Press the
reset button. Return
power switch to AUTO.
12
e. Unit is unplugged at wall
receptacle.
e. Plug in power cord. - - -
f. Circuit breaker is tripped
or fuse is blown.
f. Reset circuit breaker or
replace fuse.
- - -
g. Beater assembly is
rotating counterclockwise.
g. Contact an authorized
service technician.
- - -
h. Product is frozen-up in
freezing cylinder.
h. Contact an authorized
service technician.
- - -
2. Unit will not operate in the
AUTO or WASH mode.
a. Unit is unplugged at wall
receptacle.
a. Plug in power cord. - - -
b. Circuit breaker is tripped
or fuse is blown.
b. Reset circuit breaker or
replace fuse.
- - -
c. Unit out on reset. c. Place the power switch in
the OFF position. Press
the reset button. Return
power switch to AUTO.
12
3. No compressor operation
in the AUTO mode.
a. Beater motor is out on
overload.
a. Place power switch in
OFF position. Press the
reset button. Return
power switch to AUTO.
12
b. Condenser is dirty
(air-cooled units).
b. Clean condenser monthly. 24
c. The CLEANING REQ'D
light is lit.
c. Clean the unit according
to instructions in the
Operator's Manual.
21

Taylor 342 Tim Hortons Specifications

General

Brand	Taylor
Model	342 Tim Hortons
Category	Freezer
Language	English