OPERATOR PARTS IDENTIFICATION
4-5
Models 345, 346, 349, 355
Operator Parts Identification
4
Figure 4-4
*Note: O-ring 025307 is not used on all models. However, units
built prior to 10/2009 that have not been updated with metal
rear shell bearing X67222 or X83989 still require O-ring.
Item Description Part No.
1Door
1a Cap-Spout-Door-FCB-BLK 046191-BLA
1b Spring-COMP.480X.072X3.0 039320
1c Valve-Draw-Door-Press 039324
1d O-ring-9/16 OD X .103W 016369
1e Spout-Door-FCB-Black 046190-BLA
1f Handle-Draw-FCB-Black 046192-BLA
1g Pin-Pivot-Spout-Door 039321
1h Slide-Handle-Door-BLK 046193-BLA
1i Screw-10-32X3/8PHL-TRUS 053869
1j O-ring-9/32 OD X 1/16 Wall 029751
1k Plug-Prime-Slush-Press 039568
1l Door A.-Freezer-Slush X80599
Item Description Part No.
1m O-ring-1.129 ODX.989ID 039219
1n Nut-Spout-Door-Press 039323
2 Nut-Stud 043666
3 O-ring-5-1/4ODX.210W (Door) 017003
4 Bearing-Front-Pressure 039349
5 Beater-Plastic-FCB-Press. 041182
6 Blade-Scraper-FCB-16inch 041103
7 Shaft-Beater-Slush-PRES 083418
8 Seal-Drive Shaft 032560
*9 O-ring-7/8 OD X .139W
(Beater Shaft)
025307
10 Bushing-Beater Shaft/Boot Seal 042278
To Next Page
Loading...
