EasyManua.ls Logo

Taylor 345 - Current Conditions and Fault History

Taylor 345
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
USER INTERFACE
5-7
Models 345, 346, 349, 355
User Interface
5
Press the SELECT key to return to the OPERATOR
MENU.
Current Conditions
Screen F is CURRENT CONDITIONS. This screen
displays the current viscosity and product temperature for
each freezing cylinder. An asterisk (*) will indicate which
side is refrigerating. Press the SELECT key to return to
the OPERATOR MENU.
Note: Viscosity is checked only when product
temperature is below 40°F (4.4°C).
The following screen will display for Models 345, 346,
and 355. Model 349 displays all four freezing cylinders.
Searching Fault History
Screen G is FAULT HISTORY. This option provides a
record of the last 20 faults. The display also indicates the
date and time at which each fault occurs.
Press the arrow keys to increase or decrease the fault
page.
Page numbers are located in the upper right corner of the
display. The most recently recorded fault will appear on
page 1.
The fault description is listed on the third line of the fault
page.
Press the MENU/SELECT key to return to the
OPERATOR MENU.
Service Information
Screen H is SERVICE MENU. This screen allows the
authorized service technician to access service
information. Return to the OPERATOR MENU by using
the arrow keys to move the cursor under the letter A, and
press the MENU/SELECT key.
Syrup Out Indicator
If the word OUT appears in one of the columns next to
the word SYRUP, there is a lack of syrup or syrup
pressure being supplied for the indicated freezing
cylinder. If the machine is in the Auto or Prime modes,
the product light will flash and a warning tone will sound
for that freezing cylinder. At this time, replace the
appropriate syrup. As a safety feature, the refrigeration
system automatically stops to prevent a freeze-up in the
freezing cylinder.
If a syrup-out condition occurs on one side, that side will
enter the Hold mode, at which time refrigeration remains
off, the beater continues to run, and the CO
2
solenoid is
closed for that side to prevent the dispensing of product.
The opposite side will not be affected.
CURRENT CONDITIONS
L* 999HD 27.5F
R 1200HD 26.5F
SEL
1YROTSIHTLUAF
43:8030/52/60
NO FAULT F OUND
+++ --- SEL
2YROTSIHTLUAF
06/25/03
33:80WOLSSERPPURYSR
+++ - - - SEL
3YROTSIHTLUAF
23:8030/52/60
B H2O PRESS LOW
+++ - - - SEL
OPERATOR MENU
ABCDEFG
H
SERVICE MENU
LES>------<
AUTO MODE AUTO
OUT SYRUP OK
KO-RETAWKO-2OC

Related product manuals