7-2
OPERATOR CHECKLIST
Models 345, 346, 349, 355
Operator Checklist
7
Winter Storage
If the place of business is to be closed during the winter
months, it is important to protect the freezer by following
certain precautions, particularly if the building is subject
to freezing conditions.
Disconnect the freezer from the main power source to
prevent possible electrical damage. Your local Taylor
distributor can perform this service for you.
Wrap detachable parts of the freezer (such as the beater,
scraper blades, drive shaft, and freezer door) and place
them in a protected, dry place. Rubber trim parts and
gaskets can be protected by wrapping them with
moisture-proof paper. All parts should be thoroughly
cleaned of dried mix or lubrication, which can attract mice
and other vermin.
Note: It is recommended that an authorized service
technician perform winter storage draining, to ensure all
water has been removed. This will prevent the
components from freezing and rupturing.
To Next Page
Loading...
