6-16
OPERATING PROCEDURES
Model 810, 812, 820, 822, 828 Series
Operating Procedures
6
Daily Cleaning Procedures
Note: The three-platen Model L810 has been selected to
illustrate the step-by-step procedures. For grills with
fewer than three platens, perform the following steps as
appropriate for your grill platen configuration.
1. Raise the upper platen to the Open position by
pressing the red RAISE button.
Figure 6-44
CAUTION! Never use force to raise the upper
platen. Damage to components may result. Only use the
RAISE button to raise the upper platen.
Note: Do not turn the power switch to the OFF position
while the platens are down.
2. Press the CLEAN key. When the cook surfaces reach
the proper temperature for cleaning, an alarm will
sound and the message READY TO CLEAN will be
displayed.
Figure 6-45
3. Press the RAISE button to cancel the alarm.
Figure 6-46
4. Put on heat-resistant gloves.
Figure 6-47
CAUTION! The upper platen surface and
release sheet are very hot. To prevent burn injuries, wear
heat-resistant gloves when replacing the release sheets.
To Next Page
Loading...
