EasyManua.ls Logo

Taylor C125 - Coffee-Granita Production

Taylor C125
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH - 10
It is possible to increase or decrease the
remaingin freezing period acting on the timer in
whatever moment.
- Once optained the required consistency,
stop the machine by pressing the ON-OFF
pushbutton and check that the led is grey.
Lift the cover and proceed with the
extraction of the product using the showel in
outfit.
4.3 Production of coffee-granita
The coffee-granita is a delightful speciality
which requires for its preparation a cyclic
agitation which maintains its classic dark colour.
For this reason the machine is equipped with a
special program which permits the production of
granita with a minimum air incorporation.
For selecting the program ”cyclic agitation”
proceed as follows:
- Pour into the machine the required mix as
already previously explained
- Press the pushbutton ON-OFF and verify
that the led is green
- Press the pushbutton “cyclic agitation” and
verify that the led is green. In this function
the agitator will stop for at about 57 sec. and
and works for at about 3 sec.
- Regulate the freezing timer as explained
previously in order to start the production.
- Once finished the production, desactivated
the program “cyclic agitation” by pressing
the respective pushbutton and check that
the led is grey.
- Switch off the machine and extract the
product from the cyclinder.

Related product manuals