6. Pour in the cylinder a little quantity of
cleaning solution. Wash carefully.
7. Use a sponge for removing from the cylinder
Rinse carefully using clear warm water. If
required repeat the operation.
8. Sanitize carefully the cylinder and all
components previously disassembled and
cleaned. Let them dry in the open air.
- To preserve plastic components and
gaskets, never use solvents and/or diluents
during washing.
- Sanitizing chemicals shall be used
according to laws in force and with the
utmost caution.
- After any sanitizing operation, it is
indispensable not to touch the sterilized
parts either with hands or with towels,
sponges or other.
- Avoid making the agitator run empty, as the
machine can be damaged.
To Next Page
Loading...
