Taylor C302 - Page 23

USER INTERFACE
5-5
Model C302
User Interface
5
This screen allows the Daylight Saving Time options.
If the Daylight Saving Time option is enabled, the
time will be advanced by 1 hour at 2:00 a.m. on the
first Sunday in April, and will be retarded by 1 hour at
2:00 a.m. on the last Sunday in October.
12. Screen D is MANUAL DEFROST. This screen allows
the operator to manually defrost the left side
freezing cylinders under each LCD.
Place the cursor under YES and press the MENU
(SELECT) key, and the command will be executed.
Repeat the procedure for the right side freezing 
cylinder under each LCD.
Note: Only one freezing cylinder per LCD may be
placed in the Defrost mode at a given time.

Attempting to place more than one freezing cylinder
into Defrost mode will result in the following screen:
Press the MENU (SELECT) key to return the
machine to the operator menu.
13. Screen E is SYSTEM INFORMATION. It consists of
six display features.
The first feature indicates the software version.
The second feature indicates the bill of material 
number and the serial number.
It also indicates if the machine is equipped with a
water pressure switch.
The third feature indicates the version number of the
language and text.
The fourth feature will display the POWER SAVER
MODE, OFF, REST, or STANDBY status.
If the Power Saver Mode is Off, the following screen
will be displayed:
If a Power Saver mode is programmed, one of the
following screens will appear.
DAYLIGHT SAVING TIME
ENABLE
DISABLE
LES>----<
MANUAL DEFROST
SEYEDISTFEL
NO
LES>----<
MANUAL DEFROST
SEYEDISTHGIR
NO
LES>----<
ALREADY IN DEFROST
SYSTEM INFORMATION
C300 CONTROL UVC2
VERSION 1.00
SEL
B.O.M. C30227C000
S/N K0000000
WITH H20 PRESS SW
SEL
SYSTEM INFORMATION
LANGUAGE
VERSION 1.09 ENGLISH 446
SEL
POWER SAVER MODE
OFF
SEL
POWER SAVER REST
CYCLE 1
SUN 01:00
SUN 08:30
+++ --- SEL
POWER SAVER STANDBY
CYCLE 1
SUN 01:00
SUN 08:30
+++ --- SEL