6-4
OPERATING PROCEDURES
Model C302
Operating Procedures
6
11. Install the handle pin through the mounting adaptor
and into the ADA handle. Mount the assembled ADA
handle onto the pivot pin.
Figure 6-12
12. Secure the assembly with the screw.
Figure 6-13
13. Insert the spring into the front of the door spout.
Figure 6-14
14. Place the threaded cap on the end of the draw valve
cavity. Turn the cap clockwise until it is secure.
Figure 6-15
15. Place the two O-rings on the prime plug and lightly
lubricate.
Figure 6-16
16. Install the prime plug.
Figure 6-17
To Next Page
Loading...
