35
Model C713 Important: Operator Checklist
PROBLEM PROBABLE CAUSE REMEDY PAGE
REF.
11. The freezing cylinder
walls are scored.
a. Missing or worn front
bearing.
a. Install or replace the front
bearing.
22
b. Broken freezer door baffle
rod.
b. Replace freezer door.
23
c. Beater assembly is bent. c. Replace beater assembly.
23
d. Gear box is out of
alignment.
d. Call an authorized service
technician.
---
12. The product makes a
popping sound when
drawn.
a. Draw rate is set too fast. a. Adjust draw rate of 5 to 7
1/2 oz. (142 g. to 213 g.)
of product by weight in 10
seconds.
25
b. Freezing cylinder not
primed correctly.
b. Drain the freezing cylinder
and reprime the machine.
27
13. No control panel functions
with power switch ON.
a. Machine is unplugged. a. Plug into wall receptacle.
---
b. Circuit breaker OFF or
blown fuse.
b. Turn the breaker ON or
replace the fuse.
---
To Next Page
Loading...
