SAFETY
3-3
Model C723
Safety
3
NOTICE! Cleaning and sanitizing schedules
are governed by your federal, state, or local regulatory
agencies and must be followed accordingly. Please refer
to the cleaning section of this manual for the proper
procedure to clean this machine.
Do not obstruct air intake and discharge openings:
The Model C723 air-cooled requires a minimum of
6 in. (152 mm) on the left and right sides and 0 in. on the
back. The Model C723 equipped with top air discharge
requires 6 in. (152 mm) on the left side, 0 in. on the right
side, and 0 in. on the back.
This will allow adequate airflow across the condenser.
Failure to allow adequate clearance can reduce the
refrigeration capacity of the freezer and possibly cause
permanent damage to the compressor.
For Indoor Use Only: This machine is designed to
operate indoors, under normal ambient temperatures of
70°F to 75°F (21°C to 24°C). The machine has
successfully performed in high ambient temperatures of
up to 104°F (40°C) at reduced capacities.
Do not run the machine without product. Failure to follow
this instruction can result in damage to the machine.
NOISE LEVEL: Airborne noise emission does not
exceed 78 dB(A) when measured at a distance of
39 in. (1.0 m) from the surface of the machine and at a
height of 63 in. (1.6 m) from the floor.
To Next Page
Loading...
Need help?
General
