Taylor C723 User Manual

5-2
USER INTERFACE
Model C723
User Interface
5
Symbol Definitions
To better communicate in the international arena,
symbols have replaced words on many of our operator
switches, function, and fault indicators. Your Taylor
machine is designed with these international symbols.
The following chart identifies the symbol definitions.
Power Switch
When placed in the ON position, the power switch allows
control panel operation.
Fluorescent Display
The fluorescent display is on the front control panel.
During normal operation, the display is blank. The display
shows menu options and notifies the operator if a fault is
detected. On International models, the display will
indicate the temperature of the mix in the hopper.
Indicator Lights
Mix Low—When the Mix Low symbol is
illuminated, the mix hopper has a low supply of mix and
should be refilled as soon as possible.
Mix Out—When the Mix Out symbol is illuminated,
the mix hopper has been almost completely exhausted
and has an insufficient supply of mix to operate the
freezer. At this time, the Auto mode is locked out and the
freezer will be placed in the Standby mode. To initiate the
refrigeration system, add mix to the mix hopper and
press the Auto symbol
The freezer will
automatically begin operation.
Optional feature: Some freezers are equipped with rear
indicator lights.
Auto Symbol
The Auto symbol will illuminate when it is pressed.
This indicates that the refrigeration system has been
activated. In the Auto mode, the Wash or Standby
functions are automatically canceled.
= Select
= ON
= OFF
= Up Arrow
= Down Arrow
= Auto
= Wash
= Mix Low
= Mix Out
= Menu Display
= Standby
= Topping Heater

Taylor C723 Specifications

General

Type	Soft Serve Freezer
Mix Flow	Gravity
Number of Flavors	2 + Twist
Electrical	208-230/60/1
Freezing Cylinder Size	3.4 qt (3.2 L)