36
Standby Procedures
Whenever the grill is idle and product is not being
cooked, the upper platen must be placed in the
STANDBY position.
1. To place the upper platen in the STANDBY
position, press the STANDBY button twice from
the open position. See Figure 65.
Figure 65
2. To raise the upper platen to the OPEN position to
resume cooking, press the RAISE button.
See Figure 66.
Figure 66
Note: If the grill remains idle for 5 continuous minutes
without being placed in STANDBY, a tone will sound
and the display will flash “PUT GRILL IN
STANDBY”.
CAUTION: Never use force to raise the
upper platen. Damage to components may result.
Only use the RAISE button to open the upper platen.
Cleaning After Each Run of Product
(Grills Using Lower Release Sheets)
Note: This manual contains separate procedures for
grills that use lower release sheets and for grills that do
not use lower release sheets. Use the appropriate
procedures for your grill.
If your grill does not use lower release sheets, go to
page 37.
Note: Do not use excessive pressure when wiping the
release sheet with the squeegee. Using excessive
pressure can scratch or tear the release sheet.
1. Squeegee the lower release sheet from front to
back. See Figure 67.
Figure 67
2. Squeegee the upper release sheet from top to
bottom. See Figure 68.
Figure 68
3. Push the residue into the grease trough.
To Next Page
Loading...
Need help?
General
