What to do if one heat zone is overheating on my Taylor QS11 Grill and the display is flashing “TOO HOT”?
If a heat zone is overheating and the display flashes “TOO HOT”, the thermocouple, relay, or relay board may be faulty. Alternatively, the unit might be displaying a fault. Clear the fault. If the action is ineffective, contact a service technician.
Why will the grease drawer not close on my Taylor QS11 Grill?
The grease drawer might not close because product has built up in the back of the grease partition. Refer to the instructions for cleaning the grease tray partition.
Why upper cook surface will not stay in the raised position on my Taylor QS11?
If the upper cook surface won't stay raised, the gas filled cylinders are likely defective. Contact a service technician.
General| Model | QS11 |
|---|---|
| Category | Grill |
| Type | Gas Grill |
| Power Source | Gas |
| Fuel Type | Propane |
To Next Page
