12
Controls and Systems
Models QS12/QS24
Step 6
Press the MENU keypad to display “SCALE F”.
Step 7
Press the UP arrow keypad to choose the Fahrenheit
or the Celsius temperature scale:
SCALE F or C
Step 8
If Fahrenheit is the desired temperature scale, press
the MENU keypad. If Celsius is desired, press the UP
arrow.
Step 9
Press the MENU keypad to return to the SCALE
message.
Step 10
If desired, the names of specific products can be
programmed to appear on the display instead of ITEM
numbers. While at the SCALE message display, press
theUParrowtodisplaythe“NAMES” message.
NAMES
Step 11
While at the NAMES message display, press the
MENU keypad and the message “NAME1” will appear
on the display. This message indicates that the
operator can program a specific product name to
appear for the first item on the menu.
NAME1
Step 12
Press the MENU keypad again, and the message
“ITM1” will appear on the display. The letter “I” will be
flashing above the cursor.
ITM1
Step 13
Using the UP and DOWN arrow keypads, enter the
desired letter (A - Z) or number (0 - 9) ( -- _ ). Once the
character letter is entered, press the MENU keypad to
move the cursor to the next position. Up to four
characters may be entered.
POM1
PORK
Step 14
After the last character has been entered, press the
MENU keypad to return to the message “NAME1”.
Step 15
Use the UP arrow keypad to display “NAME2”.
Repeat steps 6-9 until all item names have been
entered and the control will return to the message
“NAME1”.
Step 16
After entering the desired characters in the NAMES
screens, the control will return to “NAME1”.
Press the DOWN arrow to display “NAMES”.
Step 17
Press the UP arrow to display “LANGUAGE”, and
press the MENU keypad to display “ENGLISH”.
Press the MENU keypad to return to the “LANGUAGE”
display.
To Next Page
Loading...
Need help?
General
