Taylor Razzle BC10 - Operating Procedures; Mixing Instructions

23
Models BC10/BW1 1 Operating Procedures
Section 6 Operating P rocedures
Mixing Instructions
IMPORTANT: Make sure your hands are clean and
sanitized before performing these steps.
Step 1
Fill a serving cup with soft serve product and install the
plastic domed lid.
Figure 7
Figure 8
Step 2
Add “mix- in” ingredients such as liquid flavoring,
candy, cookies, fruit, or other condiments.
Figure 9
Step 3
For units using the spoon agitator, slide the agitator
onto the agitator shaft until it snaps into place.
Figure 10
Step 4
Hold the cup securely in your hands (from the side, not
from the bottom) and move the cup under the agitator.