25
Personalized Parameter Setting
Personalized parameter setting can be matched to
the requirements of the user. Setting options are:
Battery power bar setting, pedal assistant level setting,
over-current cut, pedal assistant sensor setting, speed
sensor setting and delay time setting. For the details,
please see Attached List 2 in the appendix.
Password to enter the personalized
setting mode
Hold both UP and DOWN for over 2 seconds to enter
normal settings, then hold both UP and DOWN again to
setup personalized parameters, the password 2962 must
be entered.
MODE is to confirm and enter the personalized
parameter setting page, you can then select the desired
option.
To Next Page
Loading...