31
Direction of pedal assistant sensor setting
PAS means Pedal Assistant System, “run-F” means
forward direction, “run-b” means backward direction.
Press UP/DOWN to select F or b (The default direction is
forward) and short press MODE to confirm and proceed
to PAS sensitivity setting.
Direction of PAS sensor setting
Sensitivity of PAS setting
SCN means the sensitivity of PAS. It ranges from 2 to
9 where 2 is strongest & 9 is the weakest (SCN default
value is 2). UP/DOWN is used to select the sensitivity
value and short press MODE to save & proceed to
magnet disk setting.
To Next Page
Loading...