38
Interface of slowly setting up
Exit setting
In the setting state, short press MODE (less than 2s)
to select but not save and enter the next step of settings
or go back to the previous step of settings. Long press
MODE (more than 2s) to save the setting and quit the
setting state. Long press DOWN (more than 2s) to cancel
the operating but not save setting data.
If there is no operation within one minute, the
display will exit the setting state without saving
the modification.
Recover Default Setting
DEF means recover default settings. Press both
UP+MODE to enter recover default setting. Pressing UP,
To Next Page
Loading...