TC Electronic M5000 - Technical Specifications

______________________________________________________________________________________________________________________________________________________________________________
____________________
TC Electronic A/S
M5000
Service manual
page
20
Technical Specifications:
A/D delay, processing delay, D/A delay, Sample and trig times: Please refer to service
note no 712 10 0517 in appendix
Specs for ADA-1 STEREO ANALOG IN/OUT.
Max. Input Level @ - 8 dB gain, + 21,8 dBu @ 0 dB gain, + 14,8 dBu @ 12 dB gain, + 2,8 dBu
Input Impedance 20 KOhm, electronically balanced, pin 2+, 3-
Input Gain ± 12 dB
Input CMRR DC - 1 KHz, > 60 dB
1 KHz - 20 KHz, > 40 dB
Max. Output Level + 20.8 dBu
Output Signal Balance >40 dB @ 1 KHz (BBC method)
Output Impedance 100 Ohm, electronically balanced, floating type, pin 2+, 3-
Output Gain -18 dB to + 12 dB
Frequency Response 10-22 KHz, +0 -1 dB, Fs=48.0KHz
10-20 KHz, +0 -1 dB, Fs=44.1KHz
10-15 KHz, +0 -0.5 dB, Fs=32.0KHz
Total Harmonic Dist. < 0.03 %, 1 KHz, 0 dBu
Inter modulation Dist. < 0.03 %
Dynamic Range > 98 dB
Crosstalk < -80 dB @ 1 KHz
Group Delay Linearity < 5 µS
Phase Linearity Better than 5º
Digital Conversion Input: Delta Sigma 64x oversampling, 18 bit Output: Linear 8x oversampling, 20 bit .