Tap Tempo Modes
The Nova Delay always has one global tempo. This
tempo is either tapped in via the TAP TEMPO switch,
audio tap or dialed in via the DELAY knob.
Manual mode
In manual mode it is always the global tempo that
applies.
Preset mode
When switching from manual mode to preset mode
you can set up whether it is the delay time stored in
the preset or the global tempo, that should apply.
As explained earlier the actual delay time also
depends on the selected sub-division.
To switch between using the stored delay time or the
global tempo when entering preset mode:
• Go to preset mode by pressing PRESET.
• Press and hold “TYPE” for 1 second.
- Steady PRESET key LED indicates that you are
using the global tempo.
- Flashing PRESET key LED indicates that you are
using the stored delay time.
Cool Features via ON/OFF and
TAP TEMPO switches
Tap tempo and on/off are the main functions assigned
to the ON/OFF and TAP/TEMPO switches. However,
several other features can be accessed using these
switches thus giving you even more control at the tip of
your feet.
See current preset number
What is the current preset-number? As explained
earlier you can press the PRESET button to see the
current preset number. You can also see the current
preset number following this procedure:
• Press TAP TEMPO once immediately followed by
pressing the ON/OFF switch.
ADDITIONAL FEATURES
15
To Next Page
Loading...
Need help?
General
