TC-Helicon GO XLR User Manual

6 GO XLR User Manual
6. Plug a 3.5 mm stereo cable into the LINE OUT jack if you wish to route a
stereo copy of your livestream out to other devices. In a dual-PC setup,
you will want to connect the LINE OUT jack on GO XLR to the LINE IN jack
on your streaming PC.
7. If you will be gaming on a Playstation
†
or Xbox
‡
, plug these gaming consoles
into the OPTICAL output on the rear panel.
* Yeti is a registered trademark of Blue Microphones.
† PlayStation is a registered trademark or trademark of Sony Interactive Entertainment Inc. SONY is a registered
trademark of Sony Corporation.
‡ Xbox is either a registered trademark or trademark of Microsoft Corporation in the United States
and/or other countries.

TC-Helicon GO XLR Specifications

General

Frequency range	10 - 20000 Hz
Channels quantity	- channels
Supported sample rates	48 kHz
Digital sound processing	24 bit
Line Signal-to-Noise Ratio (SNR)	101 dB
Equalizer bands quantity	4
Headphone connectivity	3.5 mm
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Number of microphone inputs	1
DJ mixer	-
Product color	Black
USB connector type	USB Type-B
Fuse	1 A
Phantom power	48 V
Power consumption (typical)	10 W

Weight and Dimensions

Depth	174 mm
Width	285 mm
Height	82 mm
Weight	1550 g