8
Step 5:
Set all EQ and/or compression on your sound system
mic channel to off, or unity (middle position - no boost
or cut).
Step 6:
Turn the Input Knob fully left and set the last four knobs
on Correct to their default position as indicated.
Quick Start
Correct is going to supply the EQ and compression
for your voice automatically. After it has been turned
on for your voice, a live sound engineer can decide if
they want to do any further processing. But know
that for the vast majority of the time, there is no
need for extra EQ or compression.
NOTE:
To Next Page
Loading...
