TCL SOCL100BT

7
Press for 2 seconds to activate Siri
®
or Google Assistant
™
.
You will hear the start-up sound. Make a request to Siri
®
or
Google Assistant
™
through the headphones' microphone.
Music control Operation
Volume up
Skip forward
Play or pause
Skip backward
Volume down
Press
Press twice
Press once
Press thrice
Press
Call control Operation
Mute/unmute the
microphone during a call
Pick up or hang up a call
Switch to another
caller during a call
Reject an incoming call
Adjust the volume
Press and
Press once
Press twice
Press and hold for 2 seconds
Press or
Music control
Voice assistant
Phone voice commands enable you to speak to Siri
®
or
Google Assistant
™
on your smartphone using your headphones.
For more infomation on using Siri
®
or Google Assistant
™
,
please consult the user manual of your smartphone or
Bluetooth
®
device.
Call control
Switch the voice language
After powering on the headphones, you will hear voice
notifications of different headphone status such as when the
battery level is low or when the headphones are connected
to the smartphone or Bluetooth device. To switch to
another voice language, see the following steps.
1 Make sure the headphones are powered on.
2 Press and hold and simultaneously for 5 seconds.
9 You will hear a sound signal to confirm that the voice
language has been changed.
X 2
00:02
00:02
Tip
• There are two voice languages (English and Mandarin
Chinese) available for selection.
X 2
X 3
00:05