To Next PageTo Next Page
Need help?Do you have a question about the TCL TAC-12CHSD/XA31I and is the answer not in the manual?
General| Type | Split System |
|---|---|
| Cooling Capacity | 12000 BTU/h |
| Energy Efficiency Ratio (EER) | 3.21 |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Air Flow Rate | 500 m³/h |
| Weight (Indoor Unit) | 9 kg |
| Operating Temperature (Heating) | -7°C to 24°C |
| Operating Temperature (Cooling) | 18°C to 43°C |
Details the buttons and functions of the remote control unit for operating the air conditioner.
Key safety guidelines and recommendations for installing the air conditioner unit.
Essential safety rules and recommendations for users operating and maintaining the air conditioner.
Lists prohibitions and safety rules to follow during appliance operation and handling.
Provides details on pipe length, connecting cables, and other installation parameters.
Instructions for installing the indoor unit, including mounting and placement.
Instructions for installing the outdoor unit, including placement and clearance.
Troubleshooting steps for error codes E1 and E2, related to sensor issues.
Troubleshooting steps for error code E6, related to indoor motor issues.
Troubleshooting steps for error codes E3 and E7, related to outdoor sensors.
Troubleshooting steps for error code E8, related to outdoor discharge pipe sensor.
Troubleshooting steps for error codes E0 and E5, related to communication issues.
Troubleshooting steps for error code EA, related to current sensor faults.
Troubleshooting steps for error code E9, related to outdoor PCB drive circuit damage.
Troubleshooting steps for error code EU, related to voltage sensor damage.
Troubleshooting steps for error code EE, related to EEPROM faults.
Detailed safety guidelines for installing and maintaining R32/R290 air conditioners.
Key safety principles for site, operation, and handling.
Checks for maintenance environment, equipment, and the air conditioner itself.
Procedures for checking for refrigerant leaks using detectors before maintenance.
Safety guidelines to follow during maintenance, including ventilation and fire prevention.
