07/2015 15
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94/ 9 88 11 88 Subject to technical changes.
Mail: hotline@tcsag.de ISW3030-0140 UK 2 A
Press until the delete melody sounds
1)
Programming via voice communication
establish voice communication
to the front-door station
2)
... until a ring tone sounds at the front-
door and indoor station
1)
Programming of the system is OFF *
)
a) Not necessary, if the bell buttons have not been programmed, cf. product information of the front-door station.
1) If there sounds a Progsperr tone instead, the front-door station got a programming lock.
The programming lock can be deactivated only with the Service Device TCSK-01 or the configuration software
configo™.
2) New developed front-door stations (from 2009 on)respond to that with positive acknowledgement, if the serial number
of the indoor station was received (see product information of the front-door station).
*)
device specific indication modes of the front-door station see product information of the font-door station
Cleaning
Avoid water from entering the device!
Do not use any abrasive detergents!
Clean the device with a dry or slightly wet cloth.
Remove stronger stains with a standard plastic cleaner.
To Next Page
Loading...
Need help?
General
