Need help?Do you have a question about the TCS ISW3130 and is the answer not in the manual?
General| Brand | TCS |
|---|---|
| Model | ISW3130 |
| Category | Intercom System |
| Language | English |
Activates speech and duplex communication, ends calls.
Mutes ring tone and initiates ring tone selection.
Indicates call OFF status, fault, or ring tone selection.
Controls function 8 or alternate allocation for calls/release.
Indicates active call, speaking, busy channel, or fault.
Switches lights or initiates floor call.
Opens the door or triggers light switch function.
Adjusts voice and ring tone volume in 8 steps.
Specifies the required voltage range for the device.
Details material, dimensions, and weight of the unit.
Defines operating temperature range and ingress protection rating (IP30).
Lists stand-by and maximum input current draw.
Specifies minimum distances for installation placement.
Details steps for attaching the lower cover and cable management.
Instructions for connecting cables using the 2-wire technique.
Steps to secure the upper cover onto the lower cover.
Procedure for safely opening the indoor station housing.
Details on wiring for additional functions and line specifications.
Defines default durations for conversation and standby.
Instructions for configuring the jumper for different wiring modes.
How to adjust volume during active conversations.
How to adjust volume when the device is in standby.
Limits and considerations for loop resistance in wiring.
Procedure for measuring loop resistance to ensure system integrity.
How faults are signalled and identified.
Steps for replacing an indoor station and programming bell buttons.
To Next Page
