TCS ISW3130 User Manual

12 07/2015
TCS TürControlSysteme AG Subject to technical changes.
E-Mail: hotline@tcsag.de • www.tcsag.de PI_ISW3130-uk 2 A
Configuration options
function
manually
TCSK-01
configo
TM
as of version 1.6.x
ring tone volume
x
–
–
voice volume
x
–
–
select ring tones for door calls,
internal calls and floor calls
x
–
x
ring tone for door call 2
–
–
x
parallel allocation
–
x
x
control function 8 /internal calls /
call diversion / door release auto-
matic
–
x
x
floor door function* ON/OFF
–
–
x
send sender serial number in case
of an internal call (immer aktiv)
–
–
–
call intrusion after an internal call
–
–
x
change audio AS limit
–
–
x
block ring tone output
x
–
–
block ring tone selection
–
–
x
unlimited communication time
–
–
x
reset to factory settings
–
–
x
* If the floor door release function in the EEPROM has been activated and the door release automatic function via
function key is switched on simultaneously, the control function 11 is send automatically when pressing the floor push
button. If the door release automatic is switched off, the standard floor door release function is implemented when
pressing the floor push button.
Programming with the Service Device TCSK-01
 The indoor station is acting as a device for manually controlled duplex communication.
 Use the commands “8“ to make configurations (see product information Service Device
TCSK-01).
Ser. no. = the serial number of the indoor station which is to be configured anew
ParSNo. = the serial number of the indoor station, to which the new configured indoor station is allocated to

TCS ISW3130 Specifications

General

Brand	TCS
Model	ISW3130
Category	Intercom System
Language	English