A cutter unit that makes full cuts.
A cutter unit that makes partial cuts.
External media roll hanger T22 media roll holder When this option is attached to the printer, a
media roll with an outer roll diameter up to
203mm (8”) and inner core diameter of 76.2mm
(3”) can be used.
NOTE:
The above options are available from your nearest Tyco Electronics representative
A1.3 Media
Please make sure that the media to be used is approved by Tyco Electronics. The warranties do not apply to
problems caused by using media that is not approved by Tyco Electronics.
For information regarding Tyco Electronics-approved media, please contact a Tyco Electronics authorised
representative.
A1 .3.1 Media Type
The table below shows the size and shape of the media that can be used on this printer.
Label
Black Mark
(on reverse side)
Ta
To Next Page
Loading...