Batch mode
Strip mo
de
25.4 to 112 (1.0 to 4.41)
(1)
Width including backing paper
Cut mode
(2)
Media width 22.4 to 109 (0.88 to 4.29)
10 to 999
(0
.39 to 39.3)
Label 203 dpi
25.4 to 152.4
(1.0 to 6)
25.4 to 999
(1.0 to 39.3)
(3)
Media pitch
Tag 203 dpi
10 to 999
(0.39 to 39.3)
25.4 to 999
(1.0 to 39.3)
203 dpi
8 to 997
(0.31 to 39.25)
23.4 to 150.4
(0.92 to 5.92)
19.4 to 993
(1.0 to 39.1)
(4)
Media length
(5)
Gap/black mark length 2.0 to 10.0 (0.08 to 0.39)
6.0 to 10.0
(0.24 to 0.39)
(6)
Black mark width
Min. 8.0 (0.31)
Thickness 0.06 to 0.19 (0.0024 to 0.0075)
Ø
127 (5)
Ø
214 (8.42): When the optional External Media Roll Hanger is used.
Max. outer roll diameter
Roll direction Outside (standard), Inside
Inner core diameter 25.4 to 38.1, or 76.2 (1 to 1.5, or 3)
(See NOTE 2.)
NOTES:
1.
To ensure print quality and print head life use only Tyco Electronics approved media.
2.
When using a media roll of 76.2-mm (3”) inner core diameter, the 3”-Diameter Media Shaft included in the
optional External Media Roll Hanger is required.
A1 .3.2 Detection Area of the Transmissive Sensor
The Transmissive sensor is fixed and positioned at 6.35 mm right of the center of the media path.
The Transmissive Sensor detects a gap between labels, as illustrated below.
Min. 8 mm
Gap
Label
Label
Min. 2 mm
(Min. 6 mm:
cut mode
To Next Page
Loading...